台安变频器(TAIAN)N2 English manual说明书_1-83.doc

N2 Series Adjustable Frequency A.C. Motor Drive  TAIAN N2-220V 0.4~22KW ( 1.2~33.2KVA ) N2-440V 0.75~22KW ( 1.7~36.6KVA ) Operations Manual Table of Contents Foreword 1 Precautions for Operation 2 Operational Environment 6 General Introduction 7 Specifications 9 Wiring Rules 11 Keypad Operations 21 Parameter List 22 Functional Description 30 Failure Codes 60 Maintenance Section 65 Filters 66 Dimensions 70 Breaker Resisters & Reactors 74 Trouble Shooting 78 Foreword To fully employ all functions of this Taian T-verter, and to ensure the safety for its users, please read through this operations manual in detail. Should you have any further questions, please feel free to contact your local distributor or regional representative. PLEASE READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS T-VERTER The T-verter is a power electronic device. For safety reasons, please read carefully those paragraphs with “WARNING” or “CAUTION” symbols. They are important safety precautions to be aware of while transporting, installation, operating or examining the T-verter. Please follow these precautions to ensure your safety. WARNING Personnel injury may be resulted by improper operation. CAUTION The T-verter or mechanical system may be damaged by improper operation. WARNING Do not touch the PCB or components on the PCB right after turning off the power before the charging indicator went off. Do not attempt to wire circuitry while power is on. Do not attempt to examine the components and signals on the PCB while T-verter operating. Do not attempt to disassemble or modify internal circuitry, wiring, or components of the T-verter. The grounding terminal of the T-verter must be grounded properly (200V class:Ground to 100 or less, 400V class: Ground to 10Ω or less). This is a product of the restricted sales distribution class according to EN61800-3. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CAUTI