验货检验基本安全概念.pdf

BV CPS-IAA TM 106 Revision: 00 Basic Safety Concept for Inspector Reference: ASTM and EN standards Date: Apr.13 2010 Herbert Zhu Training objective ►To set up basic safety concept when inspect the consumer products. Bureau Veritas Presentation _ Date 2 Traumatic Risk Chapter 1 Sharp point and Sharp edge ►It means the accessible sharp point or sharp edge might hazard user’s body or hand to hurt or thrust user skin. Bureau Veritas Presentation _ Date 4 Sharp point and Sharp edge ►Normally, for the product are suitable for 3A+, functional sharp point and sharp edge is acceptable. ►However, for 3A+ to 8A products, it should be warning if product contains any sharp point or sharp edge. Bureau Veritas Presentation _ Date 5 Sharp point and Sharp edge ►Check if any sharp point or sharp edge on accessory. 附件不要有尖锐点、锋利边及针等。 Bureau Veritas Presentation _ Date 6 Sharp point and Sharp edge ►The corner or Velcro should be round without sharp edge. 有尖角的尼龙搭扣，搭扣边缘要打磨圆滑. Bureau Veritas Presentation _ Date 7 Finger Entrapment ►To prevent child’s finger was jammed by moveable part or round hole on rigid material, such as gap between lid and base of a cabinet, gap along wheel of car, gap between winder key and toy, gap between two adjacent spirals of spring. ►Under normal use condition, if 5mm diameter rod could insert, 12mm (EU) or 13mm (US) rod must could be inserted. Bureau Veritas Presentation _ Date 8 Finger Entrapment ►For Kid-relat