园林景观电气工程施工方案.docx

园林景观电气工程施工方案 Chapter 1.Project Overview 1.Project Name: xxxxxx Landscape Engineering 2.Project n: xxxxxx is located een xxxxxxx。covering a total area of xxxxxxx hectares. 3.Project Content: Outdoor power cable laying。outdoor n pipeline laying。landscape lighting system and outdoor background music electrical system. 4.Project n: The planned n d is 60 calendar days。starting on June 1st。and completing on July 31st. 5.Quality Standards: Meeting nal。industry。and local standards and ns。achieving a qualified engineering quality level。and meeting the requirements of the owner. Chapter 2.n Plan Basis and Technical ns Used 1.Electrical engineering n drawings for the south area of Jiaxiang Administrative Square 2.Design data and requirements provided by the n unit 3."Civil Building Electrical Design Code" 16-2008 4."City Road Lighting Design Standard" CJJ45-2006 5."Design n for 10KV and Below ns" GB-94 6."Design n for Power Engineering Cables" GB-2007 7."35KV and Below Power Cable Laying" 94D101-5 8."Design and n of Power Cable Wells" 07SD101-89 9."n Pipeline and n Engineering Design n" YD5007-2003 10."Underground Channel Cable Laying" 05X101-2 11."n Site Electricity Supply Safety Code" GB-93 12."n Electrical Engineering n Quality Acceptance n" GB -2002 Chapter 3.Electrical n n and n 1.n n 1) Technical n: Before n。the nal foreman should be familiar with the design drawings and design intent。and the team members should carefully understand their respective n tasks。The foreman should explain the n plan for the key parts of the drawings。If there are any ns about the drawings。the project department should report to the supervisory team in writing。and the supervisory team should forward it to the design team。After the designer determines and changes the design n plan and res。the n can be carried out according to the revised drawings or plans。and blind n should be avoided. 2) Material n: According to the order of materials needed on the n site。materials and equipment should be orga