保险杠设计课件.doc

Serial Number: Model: J87S_08 Package Lay Out Feasibility Page PAGE 2 of_ NUMPAGES 36_ Layout Number: EV9550020AWW(VERSION 04/07) Date： 2006/07/07 Description: BUMPER ASSY W/FOG LAMP Items Comments Signature Model: J87S_08 Package Lay Out Feasibility Page_1_of 36 Initial Date: 2006/07/07 Layout Number: J87S-08 50020AWW(CAD Version 06/20) Description: BUMPER ASSY W/FOG LAMP Items Lay Out Information Confirm Remarks Yes No 1 Is the lay out drawing completed for team review? ? 2 Does Fit/Finish meet margin intension? ? 3 Does the cooling opening area meet cooling performance? ? 4 Does Approach angle meet SDS? ? 5 Does towing function meet for SDS? ? 6 Does surface Radius meet the SDS or ECE? ? 7 Is color trim definition clear for (Treatment Color) parts design? ? 8 Does Material meet the Engineering requirement? ? 9 Is the serviceability considered due to parts lay out? ? 10 Does assembly process meet FLH productions? ? 11 Does the License Plate meet SDS? ? 12 Does the Fog Lamp s photometry meet ECE? ? 13 Is Mud Guard affected? ? 14 Is draft angle defined? ? 15 Fog Lamp Bezel masking suggestion. ? Function Signature Date Function Signature Date Project Leader PEM Designer AE Craftsmanship Production CAD Supplier SE APP 1 Is the lay out drawing completed for team review? 前保結構設計與Layout目前正在進行中。 FLH 東陽 2 Does Fit/Finish meet margin intension? 2.1福特尚未提供MARGIN CHART。 表1 MARGIN CHART與CAD差異性比對表 MARGIN CHART CAD量測值 備註 Item GAP FLUSH GAP FLUSH 1 Wheel arc to Bumper 0+1.0 -0.5+0.5/-0.7 0 0 2 Fender to Bumper 0+1.0 -0.5+0.5/-0.7 0 0 6 Head Lamp to Bumper 2.0+-1.5 None 2.0 1.05 9 Grille to Bumper TBD None 2.0 None 10 Lower Mesh to Bumper 1.0 Max. None TBD None 11 Skid-plate to Bumper 1.0 Max. None TBD None 12 Fog Lamp to Bumper 5.0+1.0/-1.0 None 0 None FLH 東陽 2.2 問題與建議 2.2.1 Wheel arc to Bumper Gap=0問題 圖2圖1可作業空間，大小約30*30mm1.現行組裝順序(Fender→Bumper→Mud-Guard→Wheel-arc) 圖2 圖1 可作業空間，大小約30*30mm 2.組裝方向(如圖1) 3. 如圖1 A處無法設計組裝機構，故無法達到