Reliability-Test-Report-可靠性测试报告-PP.xlsVIP

report ___ $reportdesc.$j$ Print_Area 展旺连接器科技有限公司 ZhanWang Linker Co., LTD. QC Reliability Test Report （PP样板可靠性测试报告） To: CC： Report No: Report Date: Project No.and Name: 6V 太阳能板 1. Samples description （样品描述） 由产线随机取样 2.Test item （测试项目及依据） 见以下项目列表 Requested by: Zengdong Tested by: Xu wenxing Verified by: Approved by: Zhang nan Product Stage: EP FEP PP PS OTHER Result: ACCEPT REJECT FOR INFORMATION Comments: Lab Temperature: 23°C Lab Humidity: TEST ITEM Test Conditions S/S DEF CR MAJ MIN % DESCRIPTION 1. Temperature and Humidity （温湿度） 1. +60 °C , RH 95% for 48 hrs power off with battery * After test, place the product in room temperature for 1 hour before testing for functionality and cosmetic failures。 2. -15 °C for 48 hrs powere off with battery * After test, place the product in room temperature for 1 hour before testing for functionality and cosmetic failures。 4pcs Pass 2. Vibration （振动） Power off with battery IEC 60068-2-64:2008 Sample status: Unpackaged, Non-operation Frequency Range: 5~500 Hz Orientation: Duration Vibration parameter table: X, Y, Z axis 1hr/axis,total 3hrs RMS= 1.627Grms 2 pcs N.C 3. Water Resistance （防水） Power off with battery WGI outdoor products should pass International Standard IEC60529 IPX4 level water resistance test without water penetration in the direction most likely to cause water to enter the unit. 4. Salt mist test （盐雾） * Products are switched off * 35°C 48h 5% NaCl salt fog concentration, 48h Drying time * Product cleaned after salt mist test (external and internal parts). 1 pcs 5. Drop Resistance （跌落） Power off with battery * 0.6m drop on a hard wooden floor. 1 time for each side (front, back, top, bottom, left and right sides) * After testing each side, please do functional and cosmetic check to make sure they can work properly. 6. ROHS Test （RoHS） * Lowered Lead Limits to 100 PPM for WGI’s products. Please use ROHS standard to run the test. * Accessible Substrate: Lead limits to 100 PPM for ALL WGI’s products * L