- 1、本文档共13页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
AEC - Q101-005 - REV-
July 18, 2005
Automotive Electronics Council
Component Technical Committee
ATTACHMENT 5
AEC - Q101-005 Rev-
CAPACITIVE DISCHARGE MODEL (CDM)
ELECTROSTATIC DISCHARGE (ESD)
TEST
AEC - Q101-005 - REV-
July 18, 2005
Automotive Electronics Council
Component Technical Committee
METHOD - 005
DISCRETE COMPONENT
CHARGED DEVICE MODEL (CDM)
ELECTROSTATIC DISCHARGE (ESD) TEST
1. SCOPE
1.1 Description:
The purpose of this specification is to establish a reliable and repeatable procedure for
determining the CDM ESD sensitivity for electronic components. This test method does not
include socketed CDM.
1.2 Reference Documents:
ESD Association Specification STM5.3.1
JEDEC Specification EIA/JESD22-C101
1.3 Terms and Definitions:
The terms used in this specification are defined as follows.
1.3.1 Charged Device Model (CDM) ESD:
An ESD pulse meeting the waveform criteria specified in this test method, approximating an
ESD event that occurs when a component becomes charged (e.g., triboelectric) and
discharges to a conductive object or surface.
1.3.2 Component Failure:
A condition in which a component does not meet all the requirements of the acceptance
criteria, as specified in section 5, following the ESD test.
1.3.3 De
您可能关注的文档
- AEC - Q200-006 - Rev-A - Terminal Strength - SMD - Shear Stress Test端子强度试验.pdf
- AEC - Q200-005 - Rev-A - Board Flex - Terminal Bond Strength Test板弯曲强度测试.pdf
- AEC - Q200-004 - Rev-A - Measurement Procedures for Resettable可复位熔断器测量程序 Fuses.pdf
- AEC - Q200-003 - Rev-B - Beam Load - Break Strength - Test梁荷载。断裂强度。试验.pdf
- AEC - Q200-002 - Rev-B - Human Body Model - HBM - Electrostatic Discharge Test人体模型静电.pdf
- AEC - Q200-001 - Rev-B - Flame Retardance Test阻燃性能测试.pdf
- AEC - Q101-006 - Rev- 12V系统智能电源设备的短路可靠性表征 - Short Circuit Reliability Characterization of Smart Power Devices for 12V Systems.pdf
- AEC - Q101-004 - Rev- - Miscellaneous Test Methods其他测试方法.pdf
- AEC - Q101-003 - Rev-A - Wire Bond Shear Test线材粘结剪切试验.pdf
- AEC - Q101-002 - Rev-A - Machine Model - MM - Electrostatic Discharge Test设备模型 -静电放电试验.pdf
文档评论(0)