射孔弹类——安全数据表.doc

Southern Sichuan Machinery Plant.CASC Material Safety Data Sheet PRODUCT IDENTIFICATION Product Name Shaped Charges Trade Names and Synonyms SHAPED CHARGES Manufacturer/Distributor Southern Sichuan Machinery Plant Emergency Number Tel: (86) 0830-2790593 PREVENTION OF ACCIDENTS IN THE USE OF EXPLOSIVES The prevention of accidents in the use of explosives is a result of careful planning and observance of the best known practices. The explosives user must remember that he is dealing with a powerful force and that various devices and methods have been developed to assist him in directing this force. He should realize that this force, if misdirected, may either kill or injure both him and his fellow workers. WARNING All explosives are dangerous and must be carefully handled and used following approved safety procedures either by or under the direction of competent, experienced persons in accordance with all applicable federal, state, and local laws, regulations, or ordinances. If you have any questions or doubts as to how to use any explosive product, DO NOT USE IT before consulting with your supervisor, or the manufacturer, if you do not have a supervisor. If your supervisor has any questions or doubts, he should consult the manufacturer before use. HAZARDOUS COMPONENTS Material or Component CAS NO. TLV PEL RDX 00121-82-4 1.5 mg/m3 1.5 mg/m3 HMX 026914-41-0 NE NE HNS 20062-22-0 NE NE PYX 38082-89-2 NE NE Desensitizing Wax N/A NE NE Aluminum 07429-90-5 5 mg/m3 10mg/m3 Corrosion resistant steel N/A NE NE Iron 07439-89-6 5 mg/m3 10 mg/m3 Graphite 07782-42-5 15moocf(TWA) 2.5mg/m3 Copper 07440-50-8 1 mg/m3 1 mg/m3 Lead 07439-92-1 0.15 mg/m3 50 ug/m3 Tungsten 07440-33-7 5 mg/m3 5 mg/m3 Zinc 07440-66-6 NE NE N/A = Not assigned NE = Not establish PHYSICAL DATA Explosive Shaped Charges contained in metal cases. HAZARDOUS REACTIVITY Instability Detonates with friction, impact, heat or electrical current. Incompa