- 1、本文档共50页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
营销研究100m3/d废塑料清洗废水处理回用工程设计
毕业设计(论文)
题 目: 100m3/d废塑料清洗废水
处理工程设
摘 要本次设计的目的是对水处理进行初步设计,针对其废水水质、水量在一天内的变化比较有机污染物含量高等特点,分析与本工程相关的资料,经过多种处理方案的比较,最终选定为主体的处理工艺。
本调节池、,对污水进行预处理,去除水中的悬浮颗粒mg/L、NH3-N≤20mg/L、浊度≤10mg/L、色度≤30倍、TDS≤1000mg/L。
通过初步预算,将带来比较可观的经济效益和良好的环境效益。
本对调节池、、等主要构筑物进行计算,编制设计说明书,并绘制工艺流程、构筑物平面及高程、主要构筑物图纸。关键词:废水有机污染物水解酸化Abstract
The purpose of this paper is to design a treatment process for dealing with waste plastics cleaning wastewater.In view of its wastewater quantity within a day change is bigger, organic pollutant content is high, analysing the related material about engineering ,eventually I selected the combined technological process consisting of hydrolysis and contact oxidation after many kinds of processing scheme comparison.
The pre-treatment process is composed by grille,regulating pond and the grease separation, its purpose is to remove larger suspended particulate matter and the oil substances. Hydrolysis is a treatment unit that degrade Complex organic molecules into small molecule soluble organic matter and organic acid and provide quality gelatins for subsequent aerobic reactors.There exists mainly aerobic microorganisms and autotroph in biological contact oxidation pool organic matter be decomposed into CO2 and H2O by Aerobic microbes.
The water through this process to achieve the standards of Urban Sewage Reuse and Water Quality of Miscellaneous Water in the city: pH value6~9、BOD5≤20mg/L、NH3-N≤20mg/L、Turbidity≤10mg/L、Chromaticity ≤30 Times、TDS≤1000mg/L.
This design calculate main structures such as regulation ponds, sludge pond and CASS ponds, the second pond,compile the design specification and draw five blueprint that include process flow ,construction plan, elevation plan and the main Structures
Key words: Plastics cleaning wastewater, Organic pollutants, Hydrolysis acidification pool , CASS
目 录
前言 1
第1章 概论 2
1.1设计原始资料 2
1.1.1 设计任务 2
1.1.2 设计依据 2
1.2 设计要求 2
1.3 设计原则 3
第2章 塑料废水处理工艺流程 4
2.1 废水的来源及水质特征 4
2.1.1 城市生活垃圾处理概述 4
2.
您可能关注的文档
- 1.6MN上切式剪切机机构设计.doc
- 102机体齿飞面孔双卧多轴组合机床及CAD设计.doc
- 100t步进梁式加热炉项目设计.doc
- 100吨交流电弧炉炼钢车间设计.doc
- 107无醛涂料的制备与研究.doc
- 105系列高速柴油机连杆工艺总体方案及指定工装设计.doc
- 104.6m沿海散货船船体结构设计.doc
- 10KV线路迁改工程施工组织设计.doc
- 10t双梁吊钩桥式起重机起升机构设计与制作 Design and Manufacture of Hoisting Mechanism for 10t Double-girder Bridge Crane with Hook.doc
- 10KV变电所供配电系统设计.doc
- GB/T 29324-2024架空导线用碳纤维增强复合材料芯.pdf
- 《GB/T 29324-2024架空导线用碳纤维增强复合材料芯》.pdf
- GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集.pdf
- 《GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集》.pdf
- 中国国家标准 GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集.pdf
- 中国国家标准 GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范.pdf
- GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范.pdf
- 《GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范》.pdf
- GB/T 43860.1220-2024触摸和交互显示 第12-20部分:触摸显示测试方法 多点触摸性能.pdf
- 中国国家标准 GB/T 43860.1220-2024触摸和交互显示 第12-20部分:触摸显示测试方法 多点触摸性能.pdf
文档评论(0)