《镍钴铝三元素复合氧化物》（英文版）.docx

ICS 77.160 H 71 Nonferrous Metals Industry Standard of the People's Republic of China YS/T XXX—20XX Nickel, cobalt and aluminum composite oxide 镍钴铝三元素复合氧化物 Issue date:XXX-XXX-XX Implementation date:XX-XX-XX Issued by: Ministry of Industry and Information Technology of the People's Republic of China Foreword This document was redrafted according to the requirements of GB/T 1.1-2020. Please be aware that certain content of this document may be in relation to patent. The issuing organizations of this document are not responsible for the identification of patents. This document is proposed and under the jurisdiction of National Technical Committee 243 on Nonferrous Metals of Standardization Administration of China. This document is drafted by the following organizations: This document is mainly drafted by the following people:  Nickel, cobalt and aluminum composite oxide 1 Scope This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, certificate of quality and contract/order content of nickel cobalt and aluminum composite oxide. This document is applicable to nickel cobalt and aluminum composite oxide. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 1479.1 Metallic powders--Determination of apparent density—Part 1：Funnal method GB/T 5162 Metallic powders-Determination of tap density GB/T 5314 Powders for powder metallurgical purposes--Sampling GB/T 6284 Chemical products for industrial use--General method for determination of water content--The loss of mass on drying method GB/T 19077 Particle size analysis-- Laser diffraction methods GB/T 19587 Determination of the specific surface area of solids by gas adsorption using the BET method GB/T 20252 Lithium cobalt oxide G