年产300吨纤维素酶工厂的初步设计_毕业设计.pdf

年产300吨纤维素酶工厂的初步设计 摘 要 纤维素是年产量巨大的可再生性资源，地球上每年光合作用生成的上亿吨生 物质中，纤维素占了近一半。目前，自然界中纤维素只有一小部分得到了利用， 绝大多数纤维素不仅被白白浪费，而且还会造成环境污染。利用这一年产量巨大 的可再生性资源将其转化为人类急需的能源、食物和化工原料，对于人类社会的 可持续性发展具有非常重要的意义。 本设计采用目前认为是最好的产纤维素酶的菌种里氏木霉作为发酵菌种，液 体深层发酵过程中采用变温发酵的方法分别控制菌种的生长和产酶，提取过程中 采用超滤、层析等，提高产品的收率。最后采用喷雾干燥做成固态的酶制剂。 本设计的主要内容有：工厂总平面布置、全厂工艺流程设计、工艺计算、设 备的计算与选型、成本核算；另外，完成设计图纸8张，有工厂总平面布置图、 工艺流程图（3 张）、发酵罐设计图、种子罐设计图、发酵车间设备布置图（平 面图和立面图）。根据全厂工艺设计和计算结果可以看出，该设计能够达到工业 生产的要求。 关键词：纤维素酶； 液体深层发酵； 里氏木霉 ABSTRACT Cellulose is a kind of reproducible resource of great output, it takes about a half of the hundred million biomaterial making by photosynthesis. Presently, only a few cellulose are utilized, most of cellulose are wasted and pollute environment. It is of great importance to transfer these resource to energy ,f d, and so on. This design adopt Trichoderma reesei which produce cellulase best. During the liquid submerged fermentation course we chang the temperature in order t control the growth that germ grows and produce cellulase respectively. Ultrafiltration and chromatography are used In the extrace process for improve the yield. In the end we make solid zymin by spray dring . The design mainly include the contents hereinafter: the layout of the whole factory ,the craft argumentation of the whole factory，the calculation of the craft ，the calculation and type ch sing of main equipments, the calculation of the costs. And design 8 charts , that are the layout of the whole factory, the design of the craft process(3), the design of the fermentation pot, the design of seeding tank, the lay out for equipments of the fermentation workplace(ichnography and space).According t the craft argumentation of the whole factory and the result of the calculation, the design can