伦茨9400中文使用手册.ppt

Practical introduction: 实用简介 L-force 9400 Servo Drives L-force | Engineer 2 Introduction to L-force 9400 and engineerL-force 9400 和 engineer 的介绍 9400 servo drive set-up with interfaces 9400伺服的接口设置 Parameter setting with Engineer and keypad 通过Engineer 和 操作面板进行参数设定 Technology Applications (TA) 技术应用 Diagnostics and configuration of the application with the function block editor 使用功能块编辑器的应用配置和诊断 Multi axis application with horizontal CAN communication 使用CAN总线通讯的多轴应用  Next  Back  3 Modular set-up (≤ 11 kW) Mounting base 安装底板 Power module 功率模块 Extension module 扩展模块 Accessories 附件   Next  Back 4 Interfaces at the power module Diagnostic interface 诊断接口 Resolver input 旋转变压器接口 Multi encoder input 编码器接口 Analog / digital IOs 模拟/数字 I/O 24 V supply and state bus 24V和状态总线 CAN on board  内置CAN 2 module receptacles for extensions  2个扩展模块插槽 Module receptacle for memory module 存储模块插槽 Module receptacle for safety technology 平安模块插槽  LEDs 指示灯  Next  Back  HighLine StateLine: 1 个扩展插槽 5 LEDs指示灯 CAN ERROR CAN 错误 DRIVE ERROR 驱动器错误 USER 用户定义 CAN RUN CAN 运行 DRIVE READY 驱动器投入 24 V OFF = CAN inactive CAN没激活 = Pre-operational 预操作 = Operational 操作  = Bus warning 总线报警 = Bus off 总线关闭 OFF = Pulse inhibit due to an error 由于错误而禁止 = Controller inhibited 控制器禁止 = Controller enabled 控制器使能 OFF = OK = Error status 错误状态 = System error 系统错误 Applicable in the application 在应用中使用  ready  Next  Back  6 Keypad面板 4 direction keys for navigation 4个方向键用于导航 2 context-sensitive function keys 2个功能键 Run and stop keys (configurable) 运行和停止键〔可配置〕 Status field 状态区 Notes: 注： Diagnostic & parameter setting only 仅用于诊断和参数设定 Application is stored in the memory module 应用存储在存储模块中   ready  Next  Back 7 Your training set-up…你的培训设置… 2x 9400 HighLine Single Drive type 1〔