迅达电梯5200UCMP测试方法.pdf

Unintended Car Movement Protection system means 轿厢意外移动保护测试方法 Schindler 5200 ● Test need to be performed in each regular maintenance by authorized Maintenance person 需由授权维修人员定期测试 1. Connect the SMLCD to the main controller board 连接好SMLCD 操作器到主控制器 2. Position the Car at the 2nd Top Floor 轿厢停在次顶层 3. Confirm the car is empty. Switch the erergency electrical operation (SRR) to INSP in the controller cabinet and keep the door closed. 确认轿厢为空。然后将控制柜里的紧急电动开关SRR 打到紧急电动，保持关门状态。 4. Set parameters on SMLCD 设置参数 ·SMLCD: Press Enter →Key in →Press Enter→Select “Special para”→ Press Enter→Select “Door pos check” →Select “NO” →Press Enter ·SMLCD: 按Enter 键 →输入 →按Enter 键→ 选择 “Special para”→按 Enter 键→选择 “Door pos check” →选择 “NO”→按Enter 键 ·SMLCD: Press Enter →Key in →Press Enter→Select “General para”→ Press Enter→Select “Function para”→Select “F0”and “F8”→Set “0”→Press Enter.