电子海图手册FEA2107.2807.pdf

        电子海图手册 FEA2107.2807  FEA-2107/2807 2/4 Loading OS software 11. Press F2 key. 12. Type OS.BAT and press Enter key. 13. Press F8 key. 14. Press E key while holding down ALT key after the message “Press ALT_E to download file!” appears. 15. Type OS001.IMG and press Enter key. 16. Wait for about 20 seconds until the following message appears. Do NOT turn off the system during overwriting software, otherwise the LAN module is no longer used. Make sure that the version number is Ver.2.00 build 001. Reloading LAN adapter software 17. Press F2 key. 18. Type LAN.BAT and press Enter key. 19. Press F10 key. 20. Press Y to delete files. 21. Press E key while holding down ALT key when the message “Press ALT_E to download file!”appears. 3/4 22. Type AUTOEXEC.BAT and press Enter key. 23. Press E key while holding down ALT key when the message “Press ALT_E to download file!” appears. 24. Type SERCOTR.EXE and press Enter key. The file is loaded with the following indication. The Block number increases during the process. 25. After about 60 seconds, loading new software is completed and the following message appears. Make sure that CRC OK is in both autoexec.bat and sercotr.exe lines. Setting IP address 26. Press F2 key. 27. Type IPE1L1.BAT, IPE1L2.BAT, IPE2L1.BAT, or IPE12L2.BAT, according to the connection of LAN adapter. For example, type IPE1L1.BAT when LAN adapter is connected to the main ECDIS as No.1 LAN adapter. 28. Press Enter key. 29. Press F10 key. 30. After about 10 seconds, the IP address setting is completed. Make sure that LAN adapter software version, OS version, IP addresses at the end of the indication. LAN Ada